CPU vs GPU Bottleneck: How to Tell What Limits Your FPS
Every PC has a bottleneck. In any given moment of a game, one component is working at its limit while the others wait for it. That is normal. The useful question is not “do I have a bottleneck?” but “which part is limiting me in the games I play, and is it worth fixing?” Two simple tests answer that.
1. What a bottleneck actually is
To draw a frame, the processor first runs the game logic: physics, AI, player positions and the instructions that tell the graphics card what to draw. The graphics card then renders the image. If the processor can prepare 90 frames per second but the graphics card can only render 60, you get about 60 FPS and the game is GPU-limited. If the graphics card could render 150 but the processor can only prepare 70, you get about 70 and the game is CPU-limited.
The balance changes from game to game and even from scene to scene. A large multiplayer match or a dense city tends to load the processor. High resolution, ray tracing and heavy effects load the graphics card. That is why the same PC can be CPU-limited in one game and GPU-limited in another.
2. Test 1: watch GPU usage
You need a way to see GPU usage while you play. Windows can show it through the Game Bar performance widget (Win + G), and many graphics drivers and monitoring tools include an in-game overlay. Then play a demanding section for a few minutes.
- GPU usage stays around 95–100%: the graphics card is the limit. This is the expected situation in most single-player games at 1080p or higher.
- GPU usage stays well below that, for example 50–80%, and FPS is lower than you want: something else is holding the graphics card back. Most often that is the processor, but check the frame-rate cap first (see below).
Do not judge the processor by its total usage. Games often depend heavily on one or a few threads, so a CPU can be the limit while Task Manager shows only 40–60% total usage. A single core sitting near 100% is a stronger clue.
3. Test 2: change the resolution
This test needs no tools. Note your FPS in a repeatable spot, then lower the resolution (or the render scale) without changing other settings, and measure again in the same spot.
- FPS rises a lot: the graphics card was the limit, because a lower resolution reduces its work.
- FPS barely changes: the processor was the limit, because resolution does not change how much game logic it has to run.
Settings such as view distance, crowd density and simulation quality mostly load the processor. Texture resolution mostly uses VRAM. Shadows, lighting, anti-aliasing and ray tracing mostly load the graphics card, though ray tracing can also add processor work.
4. Typical signs of each bottleneck
| CPU-limited | GPU-limited | |
|---|---|---|
| GPU usage | Noticeably below 95% | Close to 100% |
| Lowering resolution | Little or no FPS gain | Clear FPS gain |
| Where FPS drops | Crowded areas, big battles, many players | Effect-heavy scenes, foliage, ray tracing |
| How it feels | Uneven frame times, hitching when the scene gets busy | Lower but usually steadier frame rate |
| Common in | Competitive shooters at high FPS, strategy and simulation games, MMOs | Visually demanding single-player games, high resolutions |
5. Bottlenecks that are not the CPU or GPU
- VRAM: when textures do not fit in video memory, the game swaps data over the much slower system bus. The usual symptom is sudden stutter while average FPS still looks acceptable. Lowering texture quality one step often fixes it.
- System RAM: with too little memory, or a single memory stick, games can stutter as data moves to and from the drive. See how much RAM you need for gaming.
- Storage: games that stream assets constantly can hitch on a hard drive even when the processor and graphics card have headroom.
- Heat and power: a processor or graphics card that gets too hot reduces its clock speed. Laptops are especially sensitive to power mode and cooling.
6. What to do about it
If you are GPU-limited: lower the settings that load the graphics card most (shadows, volumetric effects, ray tracing), enable an upscaler such as DLSS, FSR or XeSS, or lower the resolution. If you upgrade, the graphics card is the part that will raise your frame rate.
If you are CPU-limited: lower view distance, crowd density or simulation-related settings, close background programs, and make sure your memory runs in dual-channel mode with its rated speed enabled. Raising graphics quality may cost little or nothing here, because the graphics card has spare capacity. If you upgrade, the processor (and sometimes the platform) is the part that will help, and a faster graphics card alone will not.
If you are already above your monitor’s refresh rate: there may be nothing to fix. A frame-rate cap near your refresh rate can make frame times smoother and reduce heat and noise.
See your likely limit before you play
PC Game Checker compares your CPU, GPU and RAM separately with each game’s profile and points out which one is most likely to limit you.
Run a check →