How to Increase FPS on PC: 12 Fixes That Actually Work
Most “FPS boost” lists are padded with tweaks that do little. This one is ordered by what tends to matter most. Start with the free checks in part one, because a surprising number of slow PCs are simply misconfigured. Then adjust the settings that cost the most performance. Change one thing at a time and test the same scene, so you know what actually helped.
1. Checks to do first
Fix 1: Plug the monitor into the graphics card (desktops)
On a desktop with a separate graphics card, the display cable must go into the ports on the graphics card, usually lower on the back of the case, not the ports on the motherboard. If it is connected to the motherboard, the game may run on integrated graphics or route frames inefficiently. This one mistake can make a capable PC feel slow.
Fix 2: Make sure the game uses the dedicated GPU (laptops)
Laptops with two graphics chips sometimes launch games on the low-power one. In Windows, open Settings → System → Display → Graphics, select the game and choose the high-performance option. Task Manager’s Performance tab shows which GPU is busy while the game runs.
Fix 3: Plug in the laptop and use a performance power mode
On battery, laptops reduce power to the processor and graphics chip. Plug in, and set the Windows power mode (Settings → System → Power & battery) and any manufacturer control app to a performance profile.
Fix 4: Set the monitor to its real refresh rate
A 144 Hz monitor running at 60 Hz will look choppy no matter how high the FPS counter goes. Check Settings → System → Display → Advanced display and choose the highest refresh rate. Then make sure the game itself is not capped at 60.
Fix 5: Update the graphics driver from the right source
Install the current driver from NVIDIA, AMD or Intel, or from the laptop manufacturer if it supplies customized drivers. New drivers often include fixes for recent games. If a problem starts right after a driver update, rolling back is a valid test.
2. Graphics settings with the biggest impact
Fix 6: Turn on upscaling
DLSS (NVIDIA RTX), FSR (works on most modern GPUs) and XeSS render the game at a lower internal resolution and reconstruct a sharper image. The “Quality” mode is usually the best starting point. At 1080p the image can get softer in the more aggressive modes, so try Quality before Performance.
Fix 7: Lower the expensive settings, not everything
Dropping from Ultra to Low across the board often makes a game look much worse for gains you could get from a few settings. These usually cost the most:
| Setting | Typical cost | Advice |
|---|---|---|
| Ray tracing | Very high | Turn off first if FPS is the priority. |
| Shadows | High | High or Medium often looks close to Ultra. |
| Volumetric fog / clouds / lighting | High | Medium usually gives a large gain. |
| Ambient occlusion | Medium | Use the cheaper option if several are offered. |
| Anti-aliasing | Medium to high | Avoid supersampling modes; upscalers include their own anti-aliasing. |
| Textures | Low on FPS, high on VRAM | Keep high if you have enough VRAM; lower one step if you see stutter. |
| View distance / crowd density | Loads the CPU | Lower these if you are CPU-limited. |
Fix 8: Lower texture quality if you stutter
Stutter with an acceptable average frame rate is often a sign that the graphics card has run out of video memory. Lowering textures by one step usually solves it with little visual change at 1080p.
Fix 9: Use a sensible frame-rate limit
A cap slightly below your monitor’s refresh rate can make motion smoother, lower temperatures and reduce fan noise. If your FPS swings wildly, a stable cap often feels better than a higher but uneven number.
3. System-level fixes
Fix 10: Close what you do not need
Browsers with many tabs, video playing in the background, recording software and launchers all compete for the processor and memory. On PCs with 8 GB of RAM this can be the difference between smooth and stuttering. Windows Game Mode (Settings → Gaming → Game Mode) is on by default on most PCs and helps prioritize the game.
Fix 11: Check memory configuration
Running a single memory stick or memory below its rated speed costs performance in processor-limited games and on integrated graphics. Our RAM guide explains how to check dual-channel mode and memory speed.
Fix 12: Keep it cool and give the game an SSD
Dust-clogged fans and overheating cause processors and graphics cards to slow themselves down. Clean the intake filters and make sure a laptop’s vents are not blocked. Installing the game on an SSD reduces loading times and streaming stutter in open-world games.
4. What usually does not help
- “FPS booster” and “RAM cleaner” apps: they mostly close programs you could close yourself, and some add background load of their own.
- Registry tweaks and random config files: results are inconsistent and changes are hard to undo.
- Setting the game to “real-time” priority: it can make Windows unstable and rarely helps.
- Lowering resolution when you are CPU-limited: if your graphics card is not the limit, resolution changes do little. Our bottleneck guide shows how to tell.
5. When it is time to upgrade
If the checks above are done, upscaling is on and settings are already at Low to Medium, the hardware is probably the limit. Find out which part before buying anything:
- Graphics card at full usage → a faster graphics card helps most.
- Graphics card waiting, one CPU core maxed → a faster processor helps most.
- Memory near full or single stick → more RAM or a second stick is the cheap first step.
Find your weak link
Enter your CPU, GPU and RAM and pick a game. The checker estimates your 1080p FPS range for each preset and names the component most likely to limit you.
Check my PC →