144Hz Monitor Guide: Refresh Rate vs FPS
A high-refresh monitor can make games feel much smoother, but only if your PC can deliver the frames and the monitor is set up correctly. A surprising number of 144Hz monitors run at 60Hz because one setting was never changed. This guide covers both sides: what your hardware needs and how to configure the display.
1. Refresh rate vs frame rate
The refresh rate, measured in hertz (Hz), is how many times per second the monitor updates the image. The frame rate, measured in frames per second (FPS), is how many new images your PC produces. You see the benefit of a 144Hz monitor when the PC delivers frame rates well above 60 FPS.
- At 60 FPS on a 144Hz monitor, motion is similar to a 60Hz screen, though input can feel slightly more responsive.
- Between roughly 90 and 144 FPS, motion becomes clearly smoother.
- Above 144 FPS, the screen cannot show the extra frames, though very high frame rates can still reduce input latency slightly in competitive games.
2. Can your PC drive 144Hz?
It depends on the game. Esports titles are designed to run at high frame rates and often reach 144 FPS on mid-range hardware. Demanding single-player games may need lower settings or upscaling to get close. High frame rates also put more load on the processor, so a CPU that is fine at 60 FPS can become the limit at 144. Our bottleneck guide explains how to find out.
| Game type | Realistic target on mid-range hardware |
|---|---|
| Competitive shooters and MOBAs | 144 FPS or more at 1080p with tuned settings |
| Fast action and racing games | 90–144 FPS with medium settings or upscaling |
| Demanding open-world games | 60–90 FPS; adaptive sync smooths out variation |
3. Enable the full refresh rate in Windows
- Open Settings → System → Display.
- Select the monitor if you have more than one, then open Advanced display.
- Under Choose a refresh rate, select the highest value, for example 144Hz or 165Hz.
- In each game, check that the display mode uses the same refresh rate and that the frame-rate limit or V-Sync is not capping you at 60.
If the higher rate is not listed, the cable, port or driver is usually the reason.
4. Use the right cable and port
- Desktops: connect the monitor to the graphics card, not the motherboard. Motherboard ports use integrated graphics, if any.
- DisplayPort supports high refresh rates on almost all gaming monitors and is usually the safest choice on a PC.
- HDMI works too, but older HDMI versions or cables may limit the refresh rate at higher resolutions. Use the cable supplied with the monitor or one rated for the version the monitor supports.
- Check the monitor’s on-screen menu; some models need high refresh or a newer input mode enabled there.
5. G-Sync, FreeSync and V-Sync
When the frame rate does not match the refresh rate, you can see tearing (horizontal splits in the image) or, with V-Sync on, stutter and added input lag. Adaptive sync solves this by letting the monitor refresh when each new frame is ready. NVIDIA calls its version G-Sync, and AMD calls its version FreeSync. Many FreeSync monitors also work with NVIDIA cards as “G-Sync Compatible”.
- Enable adaptive sync in the monitor’s menu if it has an option.
- Enable G-Sync or FreeSync in the NVIDIA or AMD control software.
- Many players also cap the frame rate a few FPS below the refresh rate to stay inside the adaptive sync range.
6. 1080p 144Hz or 1440p?
At the same refresh rate, 1440p needs considerably more graphics power than 1080p because it has about 78% more pixels. If your goal is high frame rates in competitive games on a mid-range PC, 1080p is easier to drive. If you mostly play single-player games and have a stronger GPU, 1440p offers a sharper image, and upscaling can help reach higher frame rates.
7. Quick answers
Is a 144Hz monitor worth it if I only get 60 FPS?
The benefit is small at 60 FPS. A high-refresh monitor pays off when your PC reaches well above 60 FPS in the games you play, or when adaptive sync smooths a frame rate that varies.
Why is my 144Hz monitor stuck at 60Hz?
Usually the refresh rate in Windows is still set to 60Hz, the cable or port does not support the higher rate, or the monitor is connected to the motherboard instead of the graphics card.
Should I use V-Sync with a 144Hz monitor?
If your monitor supports G-Sync or FreeSync, use adaptive sync instead, often with a frame cap slightly below the refresh rate. Classic V-Sync prevents tearing but can add input lag.
Check a game with your PC
Enter your CPU, GPU and RAM. PC Game Checker compares them with each game’s hardware profile and returns an estimated 1080p FPS range and the component most likely to hold you back.
Check my PC →